Beretta 1301 Tactical

[Maximus7]

I went with Blitzkrieg, as recommended by someone here. I like the sight, although I think I have the tall version.

https://www.blitzkriegcomponents.com...ght-posts.html

Thanks for the link, that could be a possibility. I'm considering having a custom one made. We'll see.

[okie john]

I saw you have an LPA steel rear sight, I have one on order.

Which model is this? Half of the product descriptions on the LPA site come up in Italian.


Okie John

[Maximus7]

Which model is this? Half of the product descriptions on the LPA site come up in Italian.


Okie John

I ordered from here;

https://www.opticsplanet.com/lpa-adj...crew-down.html

this is the sight;

https://www.lpasights.com/en/products/bar11rd2/

[mmc45414]

Half of the product descriptions on the LPA site come up in Italian.

I ordered from here;
https://www.opticsplanet.com/lpa-adj...crew-down.html

I believe Fusion is a primary NA distributor for them.

[Centerfire]

Fusion is the most reliable source since they're the importer and distributor. TacOrd in Canada sells machined apertures.

[okie john]

Thanks.


Okie John

[ricky_bobby]

Correct above - order from Tyler at Fusion Firearms in FL as they are master US Distributor for LPA Italy

I ordered BAR11D4 (standard ghost ring no rear dots) - I don’t like rear dots on shotguns personally too busy of a sight picture

But on Fusion sight you can order the D2 aperture if you want rear dots with your ghost ring

But as Centerfire mentioned Tacord in Canada sells full and half ring ghost ring apertures for the LPA sight as well as direct mount optic mount plates

[Maximus7]

Correct above - order from Tyler at Fusion Firearms in FL as they are master US Distributor for LPA Italy

I ordered BAR11D4 (standard ghost ring no rear dots) - I don’t like rear dots on shotguns personally too busy of a sight picture

But on Fusion sight you can order the D2 aperture if you want rear dots with your ghost ring

But as Centerfire mentioned Tacord in Canada sells full and half ring ghost ring apertures for the LPA sight as well as direct mount optic mount plates

I would have originally ordered from Fusion, had I known about them, but I did just order a tritium rear aperture from them. Great pricing & quick shipping.

[ricky_bobby]

They are great and thanks to @Centerfire and the community here for sharing them - I even got a spare set of screws from Fusion when I ordered my LPA steel rear sight for $7 just to have -

The steel sight is an upgrade from the stock polymer one IMO (I do not feel they need to skeletonize the steel or make from aluminum, as the 1301T is lighter than the M4 out of the box as it stands), and I don't notice the additional ounce of weight but I do notice the lighter handguard hardware from Aridus and stock adapter - I feel like the 1301T is now 'battle ready' and if using an optic I highly recommend the half moon Rob Haught aperture from Tacord in Canada-

Now I just need a new run of Aridus SMRT followers to complete-

[destruya]

So I managed to track down and purchase all the subcomponents for the threaded barrel I bought (only waiting on the piston assembly at the moment). Does anyone here have any experience disassembling and reassembling the barrel, and is assembling it something that a novice could do, or should I drop them off at a gunsmith?